Meridian Pad

The meridian pad is perfectly sized for optimal coverage to small areas or meridians via the point probe port. This convenient pad easily slips under your clients' garments for essential privacy.

It is a very site-specific pad 3” x 8” (7.62 x 20.32cm) that can be used with animals or humans for extremely localized work.

 

An internal woven wire runs the full length maintaining balance throughout the entire electrode for a more balanced and consistent surface area performance.
 

This little wonder is especially fantastic while working in the "Body and Face Scan" matrix as well as others. Be creative while using the Meridian Pad. Wipes clean easily with Protex or Transeptic as our recommended cleaner.

 

PLEASE NOTE: Connects to the back of your device with the Accessory Connector Cable, sold separately.

 

COLORS WILL VARY ACCORDING TO CURRENT AVAILABILITY

 

Made in the USA.

This is an accessory for use with stress management biofeedback devices that have a banana port for accessories. This accessory is designed to be used as an accessory in conjunction with the standard head and limb harness. It is not a replacement for the head and limb harness.

All accessories that plug into the back of the device send frequencies in one direction only. They do not provide the biofeedback loop that the head and limb harness which are plugged into the front of the device do.

Works with Q9 Stress Management System®, S8 Stress Management System®, Mandelay Q9, SCIO, INDIGO, Educator, and Eductor.

Using an accessory makes the session more effective because it brings the frequencies right to the topical area but it also sets the intention with your client that you are working on that area. It's one thing to say I am working on your liver but it's another to put an accessory there and the client says, "Oh they are really working on my liver".

 

Accessories are a very useful addition to any biofeedback session. They help biofeedback practitioners achieve optimal results.

Attaching Accessories

Plug into the red port on your device.

Special note #1: DO NOT plug in any of the accessories into the back of the device until after “TEST”. You may have the accessory on the client with the cable connected to the accessory. However, do not plug it into the back of the device until after “TEST”.

Special note #2: There is a set amount of power to send to the harness and accessories. The accessories that you have plugged into your biofeedback device will diminish the overall available power going out.

 

Activating The Point Probe

In the main panel of the biofeedback software, click System Power Settings and then click Activate Point probe. In the Disease Dictionary panel, you may also choose to check the box named “If Checked- Point Probe Boost Active”. In the Skin Rejuvenation panel, some of the buttons, when clicked, may cause a popup that says “Point Probe Amplification Active”. This indicates the “zap” would be more effective with a point probe plugged into the Red port and used on that specific part of the body. This is not required to do but it makes the “zap” more effective. Having the point probe on does not turn off the harness. You still need to have all FIVE main points (Head, both ankles, both wrists) connected so the software can see how your body is reacting. Remember, items plugged into the Red ports of the biofeedback devices are OUTPUT ONLY. For true biofeedback, you still need your harness system plugged into the biofeedback device.

 

Specific Protocols

We do not include specific protocols with accessories. Practitioners are given methods of use at training events or on training webinars. The biofeedback software is amazing and you can use accessories in many ways. For more specific suggestions we do offer an online training: Effective Use of Harness and Accessories

 

Accessory Care and Maintenance

~Fabric Accessories

Includes the silver-lined face veil and silver-lined blankets/sheet. These may be hand washed or machine washed on Cool, Delicate Cycle using no Corrosive and/or no Phosphate Gentle Soap. Woolite is an option. No Bromine, Chlorine, and/or Fluorine. We strongly recommend using the SmartKlean LAUNDRY BALL which can be purchased from our website. It is natural, safe, gentle, and does not use chemicals. DO NOT MACHINE DRY. Hang or lay flat to dry. Normal use may result in the silver fabric tarnishing. Tarnished spotting will not diminish the transfer of ions. We have chosen not to treat the medical/surgical grade silver fabric with any Anti-Tarnish coatings as these coatings have not been approved by the FDA. The Medical Industry stays away from coatings for this reason.

 

~Rubber Accessories/Harnesses/Cords

PROTEX or TRANSEPTIC® CLEANING SOLUTION are the official cleaning solutions for rubber accessories, harness systems, and cords. If these solutions are not available you may use warm soapy water. DO NOT USE essential oils, alcohol, and abrasives. These will degrade the rubber. 

SIGNASPRAY or SIGNAGEL are recommended for skin preparation with all rubber accessories.

 

~Metal Accessories with Silver Plating

PROTEX or TRANSEPTIC® CLEANING SOLUTION is the official cleaning solution for metal accessories. If these solutions are not available you may use warm soapy water. If you wish to remove the tarnish from your solid silver-plated accessories, you may use a silver polish cloth.